Improving consistency in the rough...

Selective removal of creeping bentgrass from a tee surround

Dominion Valley CC was designed and built with the idea of utilizing bent grass for tees, greens and fairways; and bluegrass in roughs.Over time, bent grass has encroached into some of the rough areas. The Maintenance Team has begun treating roughs to remove existing bent grass. Then we will seed thin areas with bluegrass/tall fescue seed. The goal is to have more consistent roughs to play from next season, and beyond.

Cicada Killer Wasps

Cicada Killer Wasp and its prey

 In mid-to-late summer golfers may begin to encounter large wasps with distinctive bands of white and yellow on black bodies around tees, greens and bunker faces. The head and thorax are a rusty red and the wings are tinged with yellow. The body is about 1 1/4 to 1 1/2 inches long. The wing span approaches three inches. Their large size and habit of buzzing around a person intimidates many.

The female wasps are equipped with a stinger and if seriously provoked can produce a sting. The females are territorial and will investigate any thing or anyone coming near their nest burrow. If a person stands still, the female will usually go on about her business.

When cicada killers first emerge, the males are very territorial and will fight with each other while establishing territories. Once females begin to emerge the males will make every attempt to defend their territory against any invader, including people. The males do not have a stinger and are harmless. However, they can intimidate anyone who is afraid of bees and wasps.

Cicada killers are solitary wasps. This means that each female has her own burrow. The burrows are dug in well drained sites. They prefer sandy or bare soils, but will also construct burrows in areas where the grass is kept very short. They can be a real problem on golf courses since greens and tees are typically constructed on a sand-based substrate. They can also become and issue around bunkers and bunker faces.

Damage to a putting green

Cicada killers hunt annual cicadas in trees. When a cicada is spotted, the wasp zooms in and attempts to sting the cicada. The cicada will utter a buzzing shriek until it becomes paralyzed. Once the cicada becomes motionless, the wasp will carry the cicada to a high point and attempt to fly back to her burrow. While larger wasps may be successful on the first attempt, smaller wasps may need to repeat the process several times.

Inside the burrow, the wasp places the cicada in a side chamber and lays an egg on it. The egg hatches, and the wasp larva feeds on the body fluids of the paralyzed cicada. Development is completed within two weeks and the wasp larva forms a cocoon. The winter is spent in the larval stage and pupates the following spring. Adult emergence coincides with the emergence of annual cicadas.

So, the best way to minimize damage to putting greens NEXT year is to aggressively treat burrows THIS year. Your Maintenance Team is out early every morning and throughout the day, scouting and treating any affected areas. If you happen across a burrow during your round of golf, contact the Pro Shop immediately and they'll direct the Maintenance Team to the area to treat it.

To see a video of a Cicada Killer Wasp digging a burrow click HERE.

The Need for Speed

A challenge that Golf Course Superintendents face is to achieve and maintain acceptable green speed while also maintaining healthy turf. Balancing the needs of the golfer with the needs of the turfgrass plant is an important aspect of any Superintendent’s job.

Golfers expect firm, fast greens. But what does it take to achieve this standard? How do we prepare the turf? How do we measure green speed? And, what might happen to a green if pushed too hard?

To measure green speed, Superintendents use a device called a Stimpmeter. It’s an inclined plane designed to release a golf ball at a consistent angle. In short, the distance a ball rolls is measured and averaged to get a number, or “Stimp”.

The Stimpmeter was invented years ago by a man named Edward Stimpson. The original purpose of the Stimpmeter was to ensure that all the greens on a course were of relatively equal speed.  The idea was to give superintendents a way to compare the speed of the 4^th green with, say, the 13^th and take steps to equalize them.  This was a good idea.

But sometimes bad things happen to good ideas.

 

Today, his simple tool, the Stimpmeter, is often misused to compare the speed of greens from course to course and unfortunately, to establish a benchmark of putting difficulty.

  

A Stimpmeter in action

From a competitive standpoint, that’s OK.  However, the quest for faster greens has consequences in terms of cost, environmental quality and the health of greens.  In short, speed can kill.  Here’s why:

Measuring to determine green speed

 

A healthy, vigorous green can be maintained at a very short cutting height for short periods of time without serious consequences if it’s been prepared properly and weather condition are acceptable.  Courses hosting tournaments often take months (and spend significant extra money) to bring greens up to an ultrafast speed for PGA Tour players.  For example, the greens at Augusta National or Oakmont may “stimp” up to 14 feet when properly prepared and dry.

However, fast greens are extremely fragile.

 If you compared them with human beings, it would be fair to say that their immune systems are weakened.  They become more susceptible to diseases and pests, and may require more chemical treatments.  Weather can also quickly destroy the health of an ultrafast green.  High temperatures and lack of moisture (or too much moisture) in the air or in the soil can be deadly to greens that are maintained at very short cutting heights.

Turfgrass root systems play an important role in the turf’s ability to withstand stress. Healthier, deeper roots translate into better stress tolerance.  So, as it turns out, the quality of a putting green at the surface is really dependant upon what is going on below the surface. In order for grass to grow at 1/10-inch height of cut or less, it needs deep, healthy roots. Good roots demand oxygen. In good soil, they get oxygen from the tiny pockets of air trapped between soil and sand particles.

Over time, the traffic from mowing equipment and golfer’s feet tend to compact the soil. When the soil becomes compacted, the air pockets on which the roots depend are crushed and the roots are, essentially, left gasping for air. Without oxygen, the grass will become weaker and eventually die.

Aerification is a mechanical process that creates more air space in the soil and promotes deeper rooting. In most cases it’s done by removing ½-inch cores from compacted soil, allowing for an infusion of air, water and nutrients. The spaces are then filled with sand “topdressing” that helps the soil retain air space. This is the typical, twice-a-year aerification that golfers have come to know and dislike since it is so disruptive.

 

 

 

a coring tine, a needle tine and a deep needle tine
 

 

 

But other aerifications take place throughout the year that don’t impact play but do play a critical role in growing and maintaining deep, healthy roots. In early winter and again in early spring, for example, a solid, deep-tine aerification is ideal for opening a channel down to the deepest level of the green. This process allows the plant to grow the longest possible roots at a time of the year when it is able and wanting to gain root mass. And since no cores are removed and the holes are so small in diameter, most golfers aren’t even aware that a cultural practice occurred. Later in the heat of late spring or summer, small needle tines are used to ventilate the green and allow for a gas exchange between the rootzone and the atmosphere. This is a critical cultural practice because as the soil temperature increases, the micro-organisms present in the soil become more active and consume more oxygen as a part of their life cycle; and just like animals breathing in and out, micro-organisms also release carbon dioxide as they consume oxygen. It is this gas, the carbon dioxide, that needs to be vented to the atmosphere or root mass will decline. Even worse for fine turf, if there isn’t enough oxygen present in the soil for micro-organisms to use, they’ll use sulfur instead to complete their life cycle and release hydrogen sulfide gas in the process, which is deadly to turf grass roots.

So, a lot of cultural work, below the surface, goes into maintaining firm, fast greens. Your Maintenance Team is constantly evolving techniques and procedures that maximize playability while minimizing surface disruption.  Our approach for the future must always be to improve the underground environment in which the root systems exist so that we can then provide the best possible above ground playing conditions. If we continue to care for the rootzone--the part of the green we DON’T see—it will in turn take care of that part of the green that we DO see, and continue to allow us the opportunity to provide firm, fast greens.

When it comes to putting greens… Out of sight should never be out of mind.

Handwatering for Healthier Turf

As the summer sun beats down upon us and the temperatures rise, water management on the golf course becomes even more critical. But even in this day of computer controlled automatic irrigation systems; sometimes the only way to put out just the right amount of water is by using an old-fashioned garden hose: handwatering.  Believe it or not, handwatering is still the best way to place a specific quantity of water on a specific area of turf. All it takes is a practiced eye, a soil probe, a hose, nozzle and, of course, a water source.

There are many reasons for modern day handwatering. The main one might be to compensate for design limitations in the irrigation system. Other reasons include water conservation, soil textural differences, syringing to cool the grass plant and elevation changes on the course. The most important end result however, is it makes possible consistent quality putting surfaces.

Some of the reasons for handwatering deserve closer scrutiny.

Poor Sprinkler Coverage: The design of an irrigation system has its limitation. Sprinkler heads can’t always be perfectly placed since that placement might require them to be in a bunker, or on a green or tee. Even with the best design, changes in elevation, and the distance the sprinkler heads are from the pump station will affect water pressure and performance.

Soil Texture Differences: Areas of the golf course have different textured soils. To avoid overwatering one area we sometimes have to underwater an adjacent area. We must compensate, therefore, by handwatering the areas that do not receive enough water. Also, some of our soils take water so slowly we must water them until runoff occurs, then come back and water them again 30 to 60 minutes later.

Water Conservation: The course collects irrigation water primarily from rainfall run off and stores it in ponds for later use. There are also wells that can be run to assist with pond refill. But in the end the course will run short of water if it doesn’t rain for an extended time. Before that happens we’ll reduce the use of overhead sprinklers and rely more on handwatering to stretch out the use of the resource.

To Cool Grass Plants That Are Under Stress: Many times during the summer, high temperature, hours of intense sunlight and wind combine to dry out turf to the point that it literally wilts. So, we rely on experienced staff members who can recognize the condition and can take corrective action. Remember, we are only cooling off the leaf tissue at this point, not wetting the soil. Technically, this is called syringing.

To Keep Consistent Putting Greens: This might be the most important reason for handwatering. Our goal is to provide the best putting surfaces possible. We want surfaces that are smooth, true, of consistent speed, and that will hold a properly struck golf shot. Even the best-designed irrigation system will not produce a green with uniform moisture content throughout. After an irrigation cycle, one area of the green will always be wetter than another. So adding water selectively to the drier areas allows us to maximize playability without sacrificing plant health.


Occasionally, we will treat dry spots with wetting agents to aid water penetration. We might also spike areas with small aerifier tines to help the water penetrate and keep our greens as uniformly consistent as possible.

When we handwater, we are careful not to apply so much water it lies on the green for longer than one minute. It just so happens that the time of day we must be out handwatering coincides with the time of day our golf course tends to be the busiest, and we do not want to interfere with play any more than necessary.

 

To hear what the USGA has to say about handwatering click here.

The bottom line is that to have consistent, playable greens, you must consider handwatering to be a routine part of putting green maintenance. For the best possible putting greens, it's an art worth perfecting.

Hazard Stakes TLC...

Using a jointer/planer to renew a hazard stake



Not too long ago the course was covered in snow and frozen solid. Temperatures had remained below average for weeks; storms had moved through the area leaving accumulations of ice and snow behind... Yet, despite these challenges, your Maintenance Team remained productive.

The highest priority for the Team during winter storms was to keep the club open. They were out early, shoveling the sidewalks and parking lots--ensuring these areas were passable and safe. Next, they checked the course for damage.

After spending the morning out in the cold, there were plenty of "indoor" projects to keep the Team busy. Above, Bernie is using a woodworking jointer to plane an old hazard stake. Over time, the color of the stakes can fade but by removing a bit of material the stake can be returned to "good as new" condition.


Before and After



We're glad that Mother Nature has relented and afforded us the opportunity to get back out on the course to complete our winter "outdoor" projects. But rest assured that, no matter what the weather, your Maintenance Team has a plan to remain productive and work toward the betterment of your golf course.

Golf Cart Access....

The goal of directing golf cart traffic is to maintain pace of play while avoiding a concentration of traffic in any one area. Invariably, some portions of the course receive more than their fair share of traffic. Over the winter we've been installing stone pavers in the highest traffic areas to more permanently address chronically worn areas. But we've also developed a gate system we hope will further disperse traffic while maintaining pace of play.

Gate Post Construction

 

The poor weather experienced over the last few weeks has allowed the Maintenance Team the opportunity to design and build a new golf cart access system. We now have green and red posts on selected holes. On days that carts are permitted to leave the cart paths, we'll be using a system slightly different from the 90 degree rule. Now, after hitting your tee shot and moving toward the landing area to play your next shot, there will be green posts near the cart path. Remain on the cart path until you reach the green posts, then you may leave the path, drive to your ball and play your next shot. Later on, when you approach the green there will be red posts. We ask that all golf carts return to the cart path before passing the red posts.

 

The Maintenance Team will move the posts daily, or as required, to avoid excessive wear.

 

Green Posts: Leave cart path anytime after this point

Red Posts: Return to path before passing this point



Divot Mix...

 

The course is covered in snow and frozen solid. Temperatures have remained well below average the entire week. Storms have moved through the area leaving accumulations of ice and snow in their wake… Yet, despite these challenges, your Maintenance Team has remained productive this week.

The highest priority for the Team during weather events is keeping the club open. You’ll see the Maintenance Team out early, shoveling the sidewalks and parking lots—making certain those areas are safe and passable. Next we’ll check the course to be certain no major issues have arisen.

After spending the morning out in the cold, there is plenty of “indoor” work to keep the Team busy. Above, Hernan is blending divot mix. He’s using a cement mixer to make a 100 pound batch. He blends sand, fertilizer, wetting agent, seed and green dye together.

Over the winter, the Team will blend about 20 tons of divot mix. All of the containers that hold the divot mix were constructed at the Maintenance Facility; each bin holds one ton of divot mix---which is the rated capacity of our front-end loader tractor. This ensures the process for moving and storing divot mix is as efficient as it can be.